Description
- Gas pre-flow time/gas post-flow automatic and manual
  The welding machine that thinks with you. Artis automatically calculates the duration of the optimal gas post-flow time according to the set welding current. This improves the gas shield of the end of the weld and tungsten electrode.
- Trigger Mode OFF: automatic shutdown
  Once the welding process is complete, the welding current switches off automatically after a specific change in the arc length.
- TAC function for time savings of up to 50% when tacking materials
  The weld pool is made to oscillate by means of pulse currents. This makes it easier to tack components together and reduces tacking time, leaving hardly any or no temper colors on the tacking points.
- PTD—pulse/TAC display function curve
  This allows you to add two additional welding parameters, “pulse” and “TAC”, to the function curve on the control panel.
- TIG Pulse function: Welding even with thin sheet thicknesses
  Pulse welding is primarily used for out-of-position welding or when welding especially thin materials. The pulse setting range is 1 Hz to 990 Hz.
- Touch high frequency ignition
  If, for example, the restricted component accessibility necessitates the use of welding torches without a torch trigger, Touch HF ignition is required. The machine detects contact with the workpiece and
  —after a defined period of time has elapsed
  —ignites the arc exactly at the desired point.
- TIG welding torch with different operating options
  We offer TIG welding torches with standard, Up/Down function, long trigger, or potentiometer, depending on your requirements.
- Spot and stitch welding: recurring welded joints
  The spot welding mode allows you to apply welding spots at even intervals. With the freely adjustable stitch pause time, you can also continue this as stitch welding.

COOKIE CONTROL